Greenwich Home Builder — Custom Homes, KDR, Duplex

Builder perspective

Building in Greenwich — what we actually look at first

Greenwich is one of the suburbs where the lot tells you what to build before the brief does — 1880s–1940s heritage housing stock, R2 Low Density / R3 Medium (Lane Cove village) controls and a median around $3.5M–$8.0M all push toward the same handful of viable build paths. Lane Cove Council is the assessment authority — 12–16 weeks for a single-dwelling da on a typical residential merit DA. A custom home on a fresh slab generally outperforms a deep renovation on this housing stock — the 1880s–1940s heritage structures rarely justify the structural work needed to bring them up to current BCA, BASIX and accessibility standards. The M (sandstone ridges) / H–E (river fall) soil class is the single most underestimated cost line — get it wrong on the desktop and the geotech report comes back with a different slab system than the one you quoted. Buildana runs HBL 487805C out of a Fairfield base, with active sites across the Sydney basin — including current and recent work in the broader Lane Cove Council catchment. Ring us on a Greenwich block before you've engaged a designer — the upfront feasibility shapes the design, not the other way around. It's how the budget actually holds.

Greenwich site considerations

Greenwich site costs cluster around three lines: footings (driven by M (sandstone ridges) / H–E (river fall) soil), demolition (driven by 1880s–1940s heritage construction era — asbestos likelihood, demolition method, tipping fees), and connection work (sewer rise, water meter upgrade, NBN, three-phase power where the brief demands it). We itemise all three in the contract — no provisional sums hiding the unknowns.

Greenwich build FAQs

The questions we get asked most often on a first Greenwich site walk.

What's the granny flat pathway in Greenwich?

Granny flats in Greenwich are usually built under State Environmental Planning Policy (Affordable Rental Housing) 2009 — secondary dwellings up to 60m², CDC pathway, no DA required on most compliant R2 Low Density / R3 Medium (Lane Cove village) lots. Typical rental return is $650–$900/week. The block needs minimum 450m², a primary dwelling already on it, and compliance with side/rear setbacks. Where the lot doesn't comply with SEPP, we lodge a DA with Lane Cove Council.

What soil class is typical in Greenwich 2065?

Greenwich sits in the M (sandstone ridges) / H–E (river fall) reactivity range based on AS 2870 site classifications we've worked with in the suburb. That drives slab design — generally waffle-pod or stiffened raft. We never assume the class; every Buildana build commissions a geotechnical investigation before slab engineering. The geotech report is yours to keep, regardless of which builder you use after.

What does it cost to knock down and rebuild in Greenwich?

End values in Greenwich sit in the $3.5M–$8.0M range based on recent sales. A typical knockdown rebuild — demo, asbestos clearance, geotech, slab, frame, full mid-spec finish for a 200m² single-storey — runs $3,000–$4,000/m² × 200m² + $0–$0k demo as a Rawlinsons-aligned 2026 baseline. We benchmark every line to the Rawlinsons Australian Construction Handbook, not back-of-envelope figures. Send through your block address and we'll run a proper feasibility against what's actually achievable on the lot.

Do you do extensions and renovations in Greenwich?

Yes — ground-floor additions, second-storey adds, full-house renovations, kitchens and bathrooms in Greenwich. The complication on 1880s–1940s heritage housing stock is that you can't price an extension off the plans alone — we pre-investigate the existing slab, frame, roof tie-in and wet-area waterproofing before quoting. Surprises during demolition are the most common reason renos blow their budget; we eliminate that by inspecting first.

How long does a DA take with Lane Cove Council?

12–16 weeks for a single-dwelling DA. CDC through a private certifier is the alternative where the design complies with the Codes SEPP — 15–25 working days for code-compliant rebuilds outside hcas. Council DA application fees fall in the $2,200–$3,600 base for a class 1a residential da range. Buildana lodges either pathway and runs all RFI responses through to determination.

Why does Greenwich cost different from a generic Sydney average?

Greenwich sits 28% above the Sydney metropolitan median build cost. Drivers are typically site access (narrow streets, restricted parking), tighter character controls requiring better materials and finishes, and trades pricing the suburb's expectation of finish quality.

How long does a custom home build take in Greenwich?

From contract signed to handover, a single-storey 4-bedroom custom home in Greenwich typically takes 9–11 months on a CDC pathway, or 12–14 months if the design needs a DA through Lane Cove Council. Add 4–6 weeks for double-storey. Pre-construction (design, engineering, BASIX, approval, contract) runs in parallel and adds another 8–16 weeks before site start. Buildana sequences both phases so the design effort and the approval effort don't sit waiting on each other.

Can I build a duplex in Greenwich?

Duplex feasibility in Greenwich depends on lot size and zoning. The minimum lot for dual occupancy under Lane Cove Council's DCP is 550m², and R3 Medium Density lots in the suburb can support attached duplex or townhouse configurations. We run a feasibility check on title, zone, area, frontage and slope before quoting — no point designing what won't approve.