Longueville Home Builder — Custom Homes, KDR, Duplex

Builder perspective

Building in Longueville — what we actually look at first

Building in Longueville starts with the same three questions on every site walk: what does the existing stock open up when you cut into it, what does Lane Cove Council, the bushland-and-river lower north shore council expect to see in the DA, and what's the soil actually going to do under the slab. Lane Cove Council is the consent authority — 12–16 weeks for a single-dwelling da, longer where heritage, tree-removal or flood-engineering referrals get triggered. R2 lots get rebuilt or extended; R3 pockets in the suburb are where duplex sits in the discussion when the brief is "two homes on one title." Site cost variability in Longueville comes down to the soil reading (M (sandstone ridges) / H–E (river fall)) and what demolition opens up in 1880s–1940s heritage stock — both are quantifiable before contract if you do the work upfront. Buildana operates under HBL 487805C with a Fairfield head office. Our contracts are fixed-price, our scope is itemised, and our reporting (monthly client builder portal) keeps the build legible at every stage. Send through a Longueville address (yours, or one you're looking at buying) and we'll run a real feasibility — title, zone, slope, frontage, soil — before any design conversation starts.

Longueville site considerations

If you've been quoted a Longueville build cheaper than expected, the savings almost certainly live in three places: soil engineering (someone hoping waffle pod will do on M (sandstone ridges) / H–E (river fall) reactive ground), demolition (someone leaving asbestos as a "variation"), or stormwater (no proper OSD or absorption trench design). All three become real costs at construction certificate stage. We price for the real engineering at contract.

Longueville build FAQs

The questions we get asked most often on a first Longueville site walk.

How long does a DA take with Lane Cove Council?

12–16 weeks for a single-dwelling DA. CDC through a private certifier is the alternative where the design complies with the Codes SEPP — 15–25 working days for code-compliant rebuilds outside hcas. Council DA application fees fall in the $2,200–$3,600 base for a class 1a residential da range. Buildana lodges either pathway and runs all RFI responses through to determination.

Why does Longueville cost different from a generic Sydney average?

Longueville sits 28% above the Sydney metropolitan median build cost. Drivers are typically site access (narrow streets, restricted parking), tighter character controls requiring better materials and finishes, and trades pricing the suburb's expectation of finish quality.

How long does a custom home build take in Longueville?

From contract signed to handover, a single-storey 4-bedroom custom home in Longueville typically takes 9–11 months on a CDC pathway, or 12–14 months if the design needs a DA through Lane Cove Council. Add 4–6 weeks for double-storey. Pre-construction (design, engineering, BASIX, approval, contract) runs in parallel and adds another 8–16 weeks before site start. Buildana sequences both phases so the design effort and the approval effort don't sit waiting on each other.

Can I build a duplex in Longueville?

Duplex feasibility in Longueville depends on lot size and zoning. The minimum lot for dual occupancy under Lane Cove Council's DCP is 550m², and R3 Medium Density lots in the suburb can support attached duplex or townhouse configurations. We run a feasibility check on title, zone, area, frontage and slope before quoting — no point designing what won't approve.

What's the granny flat pathway in Longueville?

Granny flats in Longueville are usually built under State Environmental Planning Policy (Affordable Rental Housing) 2009 — secondary dwellings up to 60m², CDC pathway, no DA required on most compliant R2 Low Density / R3 Medium (Lane Cove village) lots. Typical rental return is $650–$900/week. The block needs minimum 450m², a primary dwelling already on it, and compliance with side/rear setbacks. Where the lot doesn't comply with SEPP, we lodge a DA with Lane Cove Council.

What soil class is typical in Longueville 2066?

Longueville sits in the M (sandstone ridges) / H–E (river fall) reactivity range based on AS 2870 site classifications we've worked with in the suburb. That drives slab design — generally waffle-pod or stiffened raft. We never assume the class; every Buildana build commissions a geotechnical investigation before slab engineering. The geotech report is yours to keep, regardless of which builder you use after.

What does it cost to knock down and rebuild in Longueville?

End values in Longueville sit in the $3.5M–$7.5M range based on recent sales. A typical knockdown rebuild — demo, asbestos clearance, geotech, slab, frame, full mid-spec finish for a 200m² single-storey — runs $3,000–$4,000/m² × 200m² + $0–$0k demo as a Rawlinsons-aligned 2026 baseline. We benchmark every line to the Rawlinsons Australian Construction Handbook, not back-of-envelope figures. Send through your block address and we'll run a proper feasibility against what's actually achievable on the lot.

Do you do extensions and renovations in Longueville?

Yes — ground-floor additions, second-storey adds, full-house renovations, kitchens and bathrooms in Longueville. The complication on 1880s–1940s heritage housing stock is that you can't price an extension off the plans alone — we pre-investigate the existing slab, frame, roof tie-in and wet-area waterproofing before quoting. Surprises during demolition are the most common reason renos blow their budget; we eliminate that by inspecting first.