
Clyde Home Builder — Custom Homes, KDR, Duplex
Licensed NSW builder (licence 487805C) · Written contracts with an inclusions schedule · Cumberland DA and CDC pathways
Clyde is a small suburb undergoing significant transformation with the former Clyde refinery site being redeveloped. Established residential pockets feature post-war housing with renewal potential.
Around Clyde station and former Clyde refinery redevelopment site, Clyde lots vary street by street. Cumberland City sets the local controls; the state codes decide whether a design can go the complying development route.
Council
Cumberland City
Postcode
2142
Build rate (Rawlinsons)
$2,820–$4,250/m² + GST
DA assessment period
40 days (statutory)
Duplex minimum lot
550m² (LEP)
Low and Mid-Rise areas
6 nominated
Build rate: Rawlinsons individual house, brick veneer, medium to high finish, Sydney, excluding GST, escalated to the ABS September 2026 index.
Builder perspective
Building in Clyde: what gets checked first
Clyde (2142) is in the Cumberland local government area, so Cumberland City Council sets the local planning controls and assesses any development application. Cumberland City runs the planning, and under NSW law a DA has a 40-day assessment period. That is a deadline for a decision, not a promise. A knockdown rebuild, an extension or a granny flat each suit a different lot; which one fits Clyde depends on the house that's there now and what the planning certificate allows. The footing system comes from the geotechnical report: the engineer classifies the site under AS 2870 and the slab is designed to that class. Every Buildana job runs on a written contract with an inclusions schedule, priced once plans, engineering and site checks are done. The right first step on a Clyde site is a feasibility, not a quote: the lot decides what makes sense.
Oliver Alameri — Founder & licensed builder
Licence 487805C · 15+ years' building experience
Clyde build context
What's known for Clyde, and the document that confirms each lot-specific fact before a price.
Council
Cumberland City Council
Postcode
2142
Nearest station
Clyde
Local landmark
Clyde station & former Clyde refinery redevelopment site
Zoning
Planning certificate (section 10.7) for the address, or the NSW Planning Portal Spatial Viewer
Lot area and frontage
Title plan, or a detail survey
Site classification (AS 2870)
Geotechnical report for the lot
Age of the house
Built before 1990? Asbestos inspection before demolition
Duplex minimum lot
550m² (LEP)
Low and Mid-Rise area
Walking distance to a nominated area, measured for the lot
Median house rent, Cumberland (DCJ)
1 bed $420/wk · 2 bed $610/wk
Build rate (Rawlinsons)
$2,820–$4,250/m² + GST
Why owners build with Buildana in Clyde
What every Buildana job includes, written down.
- Licensed NSW builder (licence 487805C): the price comes as a written contract with an inclusions schedule, after plans, engineering and site checks.
- Cumberland City pathway explained plainly: a CDC from a certifier or the council if the design complies, a DA if it doesn't.
- One point of contact: Oliver sequences the survey, geotechnical report, engineering and BASIX so each informs the next.
- If the house was built before 1990, an asbestos inspection comes before demolition, and removal is by a SafeWork NSW licensed contractor.
- Changes to the scope are agreed in writing before the work is done, as NSW home building law requires.
- Anchored on the amanah principle: keeping the word given. Local landmark: Clyde station & former Clyde refinery redevelopment site. Nearest station: Clyde.
Clyde build costs from published rates
Rawlinsons Australian Construction Handbook rates, Sydney, excluding GST, escalated to the ABS September 2026 index. They are the same across Sydney: what changes for a Clyde lot is the site cost, covered below, and the design you choose. A written price comes once plans, engineering and site checks are done.
| Build type | Published rate | Basis |
|---|---|---|
| Custom home, per m² | $2,820–$4,250/m² + GST | Rawlinsons individual house, brick veneer, medium to high finish. |
| Knockdown rebuild, new house only (single storey 200–230m², double storey 260–300m²) | single storey $565k–$980k + GST, double storey $735k–$1.27M + GST | At $2,820–$4,250/m²; demolition, asbestos removal and site costs are extra. |
| Duplex, attached four-bedroom pair | $1.4M–$1.7M + GST | Both dwellings, before site costs and subdivision. |
| Ground-floor addition, per m² | $2,360–$2,840/m² + GST | Rawlinsons ground floor addition, framed to brick veneer. |
| First-floor addition, per m² | $3,790–$4,230/m² + GST | Rawlinsons full first floor addition. |
| New bathroom in an addition | $34k–$38k + GST | Rawlinsons bathroom fit-out and services, each. |
| New kitchen in an addition | $28k–$32k + GST | Rawlinsons kitchen fit-out and services, each. |
| Granny flat | From the catalogue price of the design you choose, plus site costs | Catalogue designs carry their own published price. |
Source: Rawlinsons Australian Construction Handbook, Edition 29, Sydney, escalated from the March 2021 to the September 2026 quarter with the ABS producer price index for NSW house construction (ABS). Floor area to the inner face of external walls. Excludes land, demolition, site costs, professional fees, council contributions and GST.
Free Clyde feasibility
Thinking about building in Clyde? Start with the lot, not a sales pitch.
Send your address and a rough brief. Oliver will come back with a straight read on the block: zoning, frontage, approval pathway, the checks it needs and a cost range from published Rawlinsons rates. Oliver will respond within 4 working hours for a free initial conversation. A written price follows once plans, engineering and site checks are done.
Buildana services in Clyde
Six services across Cumberland, each priced for the lot once plans, engineering and site checks are done.
Knockdown Rebuild
One builder from demolition to handover: the old house out, footings designed for the site classification, the new house built and certified.
Clyde knockdown rebuild approachDuplex
Attached or detached duplexes where the lot meets the council's minimum or the state's Low and Mid-Rise standards, checked before design.
Clyde duplex approachGranny Flat
Granny flat designs come from a priced catalogue, so the design's cost is known before site costs are added.
Clyde granny flat approachCustom Home
From sketch to handover: design, engineering, approval and build with one builder accountable.
Clyde custom home approachExtension
Adding to an existing home is harder than starting fresh, so the structure is checked before a price is written.
Clyde extension approachRenovation
Kitchens, bathrooms and whole-house renovations with an itemised scope and a written contract.
Clyde renovation approachApproval pathway in Clyde
Council: Cumberland City Council.
In Clyde, the approval pathway depends on whether the design meets every standard of State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. If it does, a complying development certificate (CDC) can come from Cumberland City or a private certifier: a CDC must be decided within 20 days where neighbours are notified (10 days otherwise). If it doesn't, the design goes to Cumberland City as a development application (DA): a DA has a 40-day assessment period. Both are deadlines for a decision; missing information, referrals and design changes add time.
CDC pathway
Council or private certifier. Under the EP&A Regulation, a CDC must be decided within 20 days where neighbours are notified (10 days otherwise). The design must meet every standard of the codes.
DA pathway
Cumberland City merit assessment. Under the EP&A Regulation, a DA has a 40-day assessment period. Used where the design needs to flex.
Local duplex minimum
- Zones R2 and R3: 550m² (Cumberland LEP 2021, cl 4.1B)
As complying development (Low Rise Housing Diversity Code): a lot of at least 400m², or the council's local minimum where that is larger, and 15m of width at the building line (12m where parking is reached only from a secondary road, parallel road or lane).
Low and Mid-Rise areas in Cumberland
Regents Park station, Auburn station and town centre, Berala station and town centre, Granville station, Lidcombe station, Westmead station. Within an 800m walk of a nominated Low and Mid-Rise area, the Housing SEPP standards allow a dual occupancy on a lot of 450m² and 12m wide, unless an exclusion applies (NSW Planning). Council rules compared
Granny flats
Under Housing SEPP 2021, Schedule 1, complying development needs a lot of at least 450m² (with 12m of frontage at the building line on a 450–600m² lot) and a secondary dwelling of no more than 60m². Otherwise a granny flat goes to Cumberland City as a DA.
Clyde site considerations
Stormwater is set by Cumberland City's requirements and designed by a civil or hydraulic engineer; tree removal or protection by Cumberland City's tree controls and an arborist's report; access and crane needs by the street itself. None of these is a suburb-wide number, so each is checked for the Clyde lot.
Soil & footings
A geotechnical engineer classifies the site under AS 2870; the structural engineer designs a waffle pod, stiffened raft or piered slab to that class.
Demolition & asbestos
A house built before 1990 may contain asbestos. A licensed assessor confirms it, a SafeWork NSW licensed removalist takes it out, and a clearance certificate comes before demolition continues.
Flood, bushfire & heritage
These are mapped lot by lot, not suburb by suburb. The lot's planning certificate and the maps below show whether any apply.
What to check for a Clyde lot, and where
- Zoning, height, floor space ratio and lot size. The zone decides what can be built; the height, floor space ratio and lot size maps set the numbers for the lot. NSW Planning Portal Spatial Viewer
- Setbacks, landscaping, parking and design. These sit in the council's development control plan, which a DA is assessed against. Development control plan, Cumberland City Council
- Flooding. Whether the lot is flood affected, and which floor level or design controls follow. The lot's planning certificate records it too. Flood information, Cumberland City Council
- Bush fire prone land. Whether the lot is mapped bush fire prone, which brings a bush fire assessment and construction standards. NSW Rural Fire Service
- Heritage. Heritage items and conservation areas, listed in Schedule 5 of the council's local environmental plan. NSW heritage databases
- Low and Mid-Rise exclusions. Lots inside a nominated area can still be excluded, for example by hazards or heritage. NSW Planning, Low and Mid-Rise exclusions
- Development contributions. Section 7.11 or 7.12 contributions depend on the council's plan, the location and the proposal. Contributions plans, Cumberland City Council
- Application fees and timing. Each council publishes its application fees in its fees and charges, and tracks its own applications online. Fees and charges, Cumberland City Council
Built by Buildana
Smart Street and The Boulevarde
Buildana builds across Cumberland: single and double-storey homes, knockdown rebuilds, duplexes where the lot meets Cumberland City's minimums or the state's Low and Mid-Rise standards, and granny flats under the Housing SEPP. It starts with your Clyde site: title, zone, slope, frontage and soil. Then design, then a written price.

Smart Street
A two-storey duplex designed and built by Buildana, pairing a rendered upper floor with dark vertical cladding.

The Boulevarde
An attached two-storey duplex Buildana delivered from start to finish, with tall arched windows and timber-toned joinery.
Projects and case studies
See Smart Street and The Boulevarde, built by Buildana, and studies of other completed Sydney homes.
Read case studiesCumberland hub
Builder hub for Cumberland: every suburb, every service, council pathway notes.
Open Cumberland hubClyde area guide
The lifestyle and neighbourhood guide for Clyde: schools, transport, market, character.
Read area guideClyde build FAQs
The questions that come up most often on a first Clyde site walk.
- What decides the site costs on a Clyde block?
- The lot does. Soil is confirmed by a geotechnical report, slope by a detail survey, trees by Cumberland City's tree controls and an arborist, stormwater by Cumberland City's requirements and an engineer's design, asbestos in a pre-1990 house by a licensed assessor, and connections by Sydney Water and the electricity network. Each is confirmed for the address before the contract, which is why no suburb-wide allowance is given here.
- What do small houses rent for in Cumberland?
- NSW DCJ Rent and Sales Report, new bonds lodged April to June 2026, houses in Cumberland: one bedroom $420 a week (33 new bonds); two bedrooms $610 a week (147 new bonds). DCJ doesn't report granny flats separately; small houses are the nearest category.
- How long does a custom home build take in Clyde?
- The ABS average build for a new NSW house was 2.99 quarters in 2025-26, measured from the start of work to completion; for townhouses and semi-detached homes such as duplexes, the ABS average build for new NSW townhouses and semi-detached homes was 3.45 quarters in 2025-26. Approval comes first: a CDC must be decided within 20 days where neighbours are notified (10 days otherwise); a DA has a 40-day assessment period. Design, engineering and requests for more information add time before either clock runs, so a Clyde timeline is set once the design and the approval pathway are known.
- Can I build a duplex in Clyde?
- Cumberland LEP 2021, cl 4.1B (Zones R2 and R3): at least 550m². As complying development under the Low Rise Housing Diversity Code, a duplex also needs a lot of at least 400m², or the council's local minimum where that is larger, and 15m of width at the building line (12m where parking is reached only from a secondary road, parallel road or lane). Separately, within an 800m walk of a nominated Low and Mid-Rise area, the Housing SEPP standards allow a dual occupancy on a lot of 450m² and 12m wide, unless an exclusion applies. Zoning, exclusions and every other standard still apply, so the title and planning certificate are checked before design.
- What's the granny flat pathway in Clyde?
- Secondary dwellings in Clyde are governed by State Environmental Planning Policy (Housing) 2021. Under its Schedule 1, complying development needs a lot of at least 450m² (with 12m of frontage at the building line on a 450–600m² lot) and a secondary dwelling of no more than 60m², along with setbacks, site coverage and landscaping standards. Smaller or constrained lots need a DA with Cumberland City. The title, overlays and current controls are checked with the certifier or Cumberland City before design.
- What soil class is typical in Clyde?
- There's no single answer for a suburb. The site classification is set lot by lot by a geotechnical engineer under AS 2870, from boreholes on the lot, and it decides the slab design: waffle pod, stiffened raft or piers. The report is commissioned before the engineering and the price, and it's yours to keep.
- What does it cost to knock down and rebuild in Clyde?
- For the new house, Rawlinsons rates (Sydney, excluding GST, escalated to the ABS September 2026 index) give single storey $565k–$980k + GST, double storey $735k–$1.27M + GST. Demolition, asbestos removal and site costs sit on top and depend on the lot, so they're confirmed by inspection, survey and geotechnical report before a written price.
- Do you do extensions and renovations in Clyde?
- Yes: ground-floor and first-floor additions, whole-house renovations, kitchens and bathrooms. Rawlinsons rates (Sydney, excluding GST, escalated to the ABS September 2026 index) are $2,360–$2,840/m² + GST for a ground-floor addition and $3,790–$4,230/m² + GST for a first-floor addition. The existing slab, frame and roof are checked before a price is written, because what's there decides what the addition needs.
- How long does a DA take with Cumberland City?
- NSW law sets the clock: a DA has a 40-day assessment period, and a CDC must be decided within 20 days where neighbours are notified (10 days otherwise) for complying development through Cumberland City or a private certifier. These are deadlines for a decision, not a promise; requests for more information, referrals and design changes add time. Application fees are in Cumberland City's fees and charges.
Rents: NSW DCJ Rent and Sales Report, April to June 2026.
Nearby Cumberland suburbs we build in
Other Cumberland suburbs, assessed by the same council: Cumberland City Council.
Ready to talk about your Clyde build?
Oliver will respond within 4 working hours for a free initial conversation about your Clyde site, the Cumberland City pathway and what it could cost to build.