
Insights · Duplex · City of Canterbury Bankstown
Duplex Development in Canterbury-Bankstown: Suburbs, Rules and Costs (2026)
In Canterbury-Bankstown, attached or detached isn't a style choice. It sets the frontage.
The Canterbury-Bankstown LEP 2023 sets the council's duplex rules, with a twist: the lot you need depends on where it sits and whether the two homes share a wall. Here's how that plays out from Bankstown to Punchbowl, what the station areas change, and what the numbers look like now.
Short answer
Can I build a duplex in Canterbury-Bankstown?
Often, if the lot is big and wide enough. Under the Canterbury-Bankstown LEP 2023, an attached duplex in Area 1 of Zone R2 needs 500m² and 15m, a detached one 700m² and 20m, and Area 2 needs 600m² and 15m. Near Bankstown, Chester Hill, Regents Park, Beverly Hills and Riverwood, the state's 450m² and 12m standard can apply instead.
Written and reviewed by Oliver Alameri
Licensed builder, NSW Contractor Licence 487805C · Founder, Buildana
Fact-checked
Duplex development in Canterbury-Bankstown: three sets of numbers
Canterbury-Bankstown has one LEP for the whole council area, and its dual occupancy clause is Canterbury-Bankstown LEP 2023, cl 4.1A(2). It splits residential land into areas shown on the LEP maps. In Area 1 of Zone R2, an attached duplex needs a lot of 500m² with 15m of frontage, and a detached duplex needs 700m² with 20m. In Area 2 it's 600m² and 15m. Each dwelling must have a frontage to a road.
Then there's the state layer. Since 28 February 2025, land within 800m walking distance of a listed Low and Mid-Rise area gets the Housing SEPP's dual occupancy standard of 450m² and 12m wide. Canterbury-Bankstown has five listed areas: Bankstown station, Chester Hill Shopping Centre, Regents Park station, Beverly Hills station and Riverwood station and town centre.
So before I talk about suburbs, I ask three questions of any address. Which LEP area is it in? Is it inside one of the station or centre catchments? And are you building two homes that share a wall, or two that stand apart? The answers give you the number that actually applies.
Attached or detached: the choice that sets your frontage
In Area 1, going detached costs you 200m² more land and 5m more frontage than going attached. That's the biggest single swing in the council's duplex rules, and it's why I ask about the layout before anything else.
A detached pair gives each home four walls of its own, which some buyers like and which can make separate titles feel cleaner. An attached pair shares one wall and fits a narrower lot. On a 15m frontage you're looking at attached or nothing; you need 20m before detached is even on the table.
The frontage rule also has a second part. Each dwelling must have a frontage to a road, so a layout with one home tucked behind the other needs care. A corner lot, or a lot with a street at both ends, makes that much easier. On a standard lot, ask council how the clause applies to your layout before you pay for design development.
On the narrower lots, the frontage decides the design before the architect does.

Got a Canterbury-Bankstown address?
Send it through. Oliver will respond within 4 working hours for a free initial conversation about which rule applies to the lot and what would fit on it.
0476 300 300Near Bankstown, Chester Hill, Regents Park, Beverly Hills and Riverwood
Inside a catchment, a duplex DA can rely on the state's 450m² and 12m instead of the council's larger figures. The floor space ratio can go up to 0.65:1, height to 9.5m, and the state sets a subdivision standard for R1, R2 and R3 of 225m² and 6m per lot. These are non-discretionary standards, so a stricter local control on the same point can't be used to refuse a design that meets them.
Three of the listed areas straddle a council boundary: Regents Park station (shared with Cumberland), Beverly Hills station (shared with Georges River) and Riverwood station and town centre (shared with Georges River). If your lot is near one of those, confirm which council it's actually in. Outside the catchment, it's that council's LEP that applies, not Canterbury-Bankstown's.
The policy switches off on excluded land, and one exclusion matters here more than in most of Sydney. Canterbury-Bankstown is one of the councils where land affected by the probable maximum flood in the Georges River catchment is excluded. NSW Planning points owners to the SES flood map to check. Heritage items, bushfire prone land, land within 200m of a relevant high-pressure pipeline and Transport Oriented Development areas are out as well.
Punchbowl, Campsie, Lakemba, Yagoona, Bass Hill and Georges Hall
The old version of this article ranked suburbs like Punchbowl, Campsie, Lakemba, Yagoona, Bass Hill and Georges Hall on their "R3 corridors". I've dropped that. Zoning is lot by lot, and the planning certificate is where you read it. What I can say is that none of these suburbs has a listed Low and Mid-Rise area of its own.
That means most lots there fall back on Canterbury-Bankstown LEP 2023, cl 4.1A: 500m² and 15m attached or 700m² and 20m detached in Area 1, or 600m² and 15m in Area 2. A lot near a suburb edge can still fall inside a neighbouring catchment, so measure the walk before you rule the state standard out.
Clause 4.1A sets its minimums for Zone R2, so an R2 lot in any of these suburbs is in the conversation. The lot still has to pass the area and frontage test, and the design still has to work for two households: two driveways or a shared one, bins, letterboxes, private open space and services for each home.
- Find the LEP area for the lot on the maps or the planning certificate
- Measure frontage at the street and at the building line
- Check whether a neighbouring station or centre catchment reaches the lot
What a Canterbury-Bankstown duplex costs, and what it rents for
Rawlinsons publishes Sydney-wide rates, so the build rate is the same here as across the city. The closest published rate for a duplex is the two-storey full brick townhouse: $3,030–$3,270/m² at a medium finish and $3,430–$3,700/m² at a high finish, Sydney, excluding GST, escalated to the ABS September 2026 index. Buildana's allowance for an attached four-bedroom pair is $1.4M–$1.7M + GST, before land, demolition, site works, approvals and contributions.
On rents, the Department of Communities and Justice reported median weekly rents of $410 for one-bedroom houses and $630 for two-bedroom houses in Canterbury-Bankstown, from 32 and 155 new bonds lodged April to June 2026. That's a guide to the local market, not a figure for a new four-bedroom duplex.
The old article had land prices, sale prices and profit margins. I've taken them out because none came from a source I can show you. Before you buy a site, put three questions to the people who can answer them: a valuer on what each finished home is worth, a lender on how they'll fund the build and what they'll lend against, and an accountant on the tax position if you sell one home and keep the other.

CDC or DA with the City of Canterbury Bankstown
Complying development under the Low Rise Housing Diversity Code needs a lot of at least 400m² or the council's dual occupancy minimum, whichever is larger. In Canterbury-Bankstown the council figure is always the larger one, so the CDC lot is 500m² attached or 700m² detached in Area 1, and 600m² in Area 2. The code also wants 15m at the building line, or 12m where parking comes only from a lane, a secondary road or a parallel road. Your certifier will confirm how the LEP frontage applies alongside it.
A CDC must be decided within 20 days where neighbours are notified (10 days otherwise). A design that needs flexibility, or a lot relying on the state standard in a catchment, goes to council as a development application, and a DA has a 40-day assessment period.
On the build, the ABS average build for new NSW townhouses and semi-detached homes was 3.45 quarters in 2025-26. Your own program goes in the contract, once the design and the site are known.

Before you commit to a Canterbury-Bankstown duplex
The checks that decide which number applies to your lot.
- 01
LEP area (Area 1 or Area 2) and zone, from the section 10.7 planning certificate
- 02
Walking distance to Bankstown, Chester Hill, Regents Park, Beverly Hills or Riverwood
- 03
Which council the lot is in, if it's near a shared station area
- 04
Georges River flood mapping, heritage and other exclusions
- 05
Frontage for each dwelling, measured at the building line
- 06
Attached or detached, decided before design starts
- 07
Section 88B restrictions and easements on the title
Canterbury-Bankstown duplex development questions
What is the minimum land size for a duplex in Canterbury council?
Across the City of Canterbury Bankstown, Canterbury included, the Canterbury-Bankstown LEP 2023 sets it: 500m² attached or 700m² detached in Area 1 of Zone R2, and 600m² in Area 2. Near a listed station area, 450m² can apply instead.
What frontage does Canterbury-Bankstown council require for a duplex?
15m for an attached duplex in Area 1 and for Area 2, and 20m for a detached duplex in Area 1. Each dwelling must have a frontage to a road.
Which Canterbury-Bankstown suburbs are Low and Mid-Rise Housing areas?
The listed areas are Bankstown station, Chester Hill Shopping Centre, Regents Park station, Beverly Hills station and Riverwood station and town centre. Residential land within 800m walking distance of them can use the state standards, unless it's excluded.
Is a detached duplex worth the extra land?
It depends on the buyers or tenants you're designing for and what the extra land costs you. A valuer can tell you whether detached homes would be worth more on completion in your street.
Do you build duplexes in Canterbury-Bankstown?
Yes. Buildana builds across Sydney, including the Canterbury-Bankstown council area, from Oliver's studio in Fairfield.
Sources and references
Costs are from the Rawlinsons handbook with the local cost index applied; rules and timeframes are checked against the sources below.
- Rawlinsons Australian Construction Handbook, Rawlhouse Publishing
- Environmental Planning and Assessment Act 1979 (NSW)
- State Environmental Planning Policy (Exempt and Complying Development Codes) 2008
- Building on bush fire prone land, NSW RFS
- Search heritage databases, NSW Environment and Heritage
- NSW Planning Portal Spatial Viewer (zoning, FSR and hazard maps)
- City of Canterbury Bankstown
- Low and Mid-Rise Housing areas, NSW Planning
- State Environmental Planning Policy (Housing) 2021
Work out the number, then the design
Send the address and whether you're thinking attached or detached. Oliver will respond within 4 working hours for a free initial conversation.