
Burwood 2134 · Burwood Council
Custom Home Builders Burwood
A custom home in Burwood is designed twice: once for how you live, once for the rules on the lot.
Burwood Council's planning controls sit in the Burwood Local Environmental Plan 2012 and the Burwood Development Control Plan. Heritage items and heritage conservation areas are listed in the plan, and they change what a new home can look like. Good custom home design reads those first, then draws your brief inside them.
Short answer
How does custom home design work in Burwood?
It starts with a survey and the planning certificate, which show zoning, heritage status and other constraints. The design is then drawn to your brief within Burwood LEP 2012 and the Burwood DCP, or the state Housing Code if complying development fits. BASIX sets energy and water targets, with a 7-star NatHERS minimum. Then it's priced and approved.
Written and reviewed by Oliver Alameri
Licensed builder, NSW Contractor Licence 487805C · Founder, Buildana
Fact-checked
Custom home design, step by step
A custom home isn't a catalogue plan with your name on it. It's drawn from your brief: who lives there, how you cook and entertain, where you work, what you need from the yard. Then it's fitted to the lot's width, fall, orientation and neighbours.
With design and construct, the builder prices the design while it's still being drawn. You see the cost of a bigger void, a second living room or a full-brick facade before it's locked into documentation, not after.
- Brief, survey and planning certificate
- Concept plans, priced as they develop
- Design development and selections
- Engineering, BASIX and documentation
- Approval, then construction
Price the design while it's still lines on paper.
Heritage in Burwood
Burwood Council lists heritage items and heritage conservation areas in Schedule 5 of the Burwood LEP 2012, and they're shown on council's heritage map. The Burwood DCP describes the conservation areas and sets guidelines for new development within them.
A new home on a heritage-affected lot means a DA. Once lodged, a DA has a 40-day assessment period. The design has to respond to the street: roof form, materials, setbacks and the front fence. Council encourages owners to talk to it early, and that's worth doing before the concept is finalised.
Designing a home in Burwood?
Send the address and your brief, however rough. Oliver will respond within 4 working hours for a free initial conversation.
0476 300 300Luxury builds, and what the rates say
Rawlinsons gives $2,940–$3,170/m² for a medium-finish full-brick individual house in Sydney, $3,940–$4,250/m² for a high-finish brick veneer house and $5,200–$5,600/m² for a prestige full-brick house with partial air-conditioning. All are excluding GST, escalated to the ABS September 2026 index.
The jump between those comes from what you choose: facade materials, glazing, joinery, stone, lighting, heating and cooling. A luxury brief is fine. It just needs to be priced as it's designed, so the finished drawings match the budget.

Complying development or a DA
If the lot isn't heritage-affected, is zoned R1, R2, R3, R4 or RU5, at least 200m² and 6m wide, and the design meets every Housing Code standard, a certifier can approve a one- or two-storey home as complying development, and a CDC must be decided within 20 days where neighbours are notified (10 days otherwise).
If the design needs more flexibility, it's a DA to Burwood Council. After approval, the ABS average build for a new NSW house was 2.99 quarters in 2025-26.
What I check first on a Burwood lot
Before the first concept, these frame the design.
- 01
Zoning and heritage status from the planning certificate
- 02
The Burwood DCP controls that apply to the lot
- 03
Lot width, area, fall and orientation
- 04
Whether the Housing Code can apply
- 05
Your brief, room by room
- 06
A budget the design is priced against as it develops
Custom homes in Burwood
Do you design and build custom homes in Burwood?
Yes. Buildana designs and builds one-off homes across Sydney, including Burwood Council. Oliver Alameri is the licensed builder (NSW contractor licence 487805C), with 15+ years' building experience.
Is my Burwood property in a heritage conservation area?
Schedule 5 of the Burwood LEP 2012 lists heritage items and conservation areas, and council's heritage map shows them. The section 10.7 planning certificate for your property confirms it.
What does a luxury home cost to build in Burwood?
The published Sydney rate for a high-finish brick veneer house is $3,940–$4,250/m², and $5,200–$5,600/m² for a prestige full-brick home, excluding GST. Site works, demolition and landscaping sit on top.
Can you price my home at the first meeting?
No. The first conversation covers the lot, the brief and the published rates. A real price follows the design and the site investigations, and it's built up as the design develops.
Do you build in Croydon Park too?
Yes. Part of Croydon Park is in Burwood Council and part in Canterbury-Bankstown and Inner West councils, so the Croydon Park page starts with which plan applies.
Sources and references
Costs are from the Rawlinsons handbook with the local cost index applied; rules and timeframes are checked against the sources below.
- Rawlinsons Australian Construction Handbook, Rawlhouse Publishing
- Environmental Planning and Assessment Act 1979 (NSW)
- State Environmental Planning Policy (Exempt and Complying Development Codes) 2008
- BASIX, NSW Planning Portal
- Search heritage databases, NSW Environment and Heritage
- Nationwide House Energy Rating Scheme (NatHERS)
- NSW Planning Portal Spatial Viewer (zoning, FSR and hazard maps)
- Burwood Council
Your brief, drawn for your lot
Tell Oliver about the lot and how you want to live. Oliver will respond within 4 working hours for a free initial conversation.