Skip to content

We’re here to make it feel like home

Buildana construction project in Western Sydney

Duplex Ramsgate — Feasibility, Design, Approval & Build

End-to-end duplex delivery in Ramsgate 2217: yield analysis, design for R2 Low zoning, Bayside Council approvals, subdivision coordination, construction, separate services and handover.

Based in Fairfield, Western Sydney5.0 Google RatingLicensed & Insured (LIC 487805C)HIA Member — Buildana Custom Home Builders SydneyHIA MemberMaster Builders Association NSW Member — BuildanaMBA NSW0476 300 300
?

Quick Answer

A duplex in Ramsgate costs $750,000–$1,500,000+ for dual occupancy construction. Attached duplex from $750K, detached from $1M. Buildana manages feasibility, Bayside Council approvals, construction and subdivision under one fixed-price contract.

Ramsgate Duplex Construction

A duplex in Ramsgate works on the larger blocks in the inland part of the village. Lots run 450 to 700m2 against the 600m2 Bayside duplex minimum, so the larger ones clear it and the smaller fall short. On a $1.7M to $2.5M market with R3 along Rocky Point Road, a Torrens-title duplex on a qualifying block is a sound play in a family-oriented established suburb.

The ground is a Botany Sands and Wianamatta Shale interface, so footings and the slab are engineered to suit the site, and the ANIP flight-path overlays add acoustic requirements worth confirming. The inter-war and post-war stock carries asbestos on the older homes, stripped under licence.

What I would check first on your Ramsgate block: the area against 600m2, the flight-path overlay, and the frontage for two dwellings.

We build these fixed-price, licence HBL 487805C. Send me the block and I will tell you what it carries.

Buildana manages the full duplex development process in Ramsgate — from feasibility assessment and architectural design through to DA or CDC approval, and fixed-price construction to dual handover. One builder, one contract, two homes.

Read our Complete Duplex Building Guide or explore duplex developments across Sydney.

  • Dual occupancy in Ramsgate from $750K
  • Bayside Council DA and CDC approvals managed
  • R2 and R3 zones — established dual occ. provisions
  • Minimum lot size 600m² (Bayside DCP — R2 dual occupancy) in Ramsgate
  • M — engineered dual-slab design included
  • Strata or Torrens title subdivision available
  • 6-year structural warranty per dwelling
  • Free feasibility check — near Rockdale (T4, 3 km) station
Ramsgate duplex — Torrens or strata subdivision, Buildana
OA

Reviewed by Oliver Alameri

Licensed Builder (NSW 487805C) · Master of Property Development · PhD Student · Building across Western Sydney since 2010

Inland blocks against 600m2

Ramsgate lots run 450 to 700m2 against the 600m2 Bayside minimum, so the larger ones clear it.

R3 along Rocky Point Road adds a medium-density option worth checking on the right block.

Sand-shale ground and flight path

The Botany Sands and Wianamatta Shale interface means footings and slab engineered to suit the site.

ANIP flight-path overlays add acoustic requirements, and older stock is stripped of asbestos under licence.

Duplex builder in Ramsgate — key facts

Suburb
Ramsgate, NSW 2217
Council / LGA
Bayside Council (Bayside)
Primary zoning
R2 Low
Typical lot size
450–700m²
Soil class
M
Median house price
$1.7M–$2.5M
Home era
1930s–1970s
Typical price range
$750,000 – $1,500,000+
Typical timeline
14–22 months design to handover
Approval pathway
CDC for compliant dual-occupancy, else DA

Want a real number for YOUR block — not a generic estimate?

Free site assessment, fixed-price contract, line-itemised quote within 48 hours. No high-pressure sales — just a real builder talking real numbers.

Two genuine homes — not two tight units sharing a wall
Each dwelling with its own courtyard, alfresco and private outdoor space
Bedroom placement planned so sound doesn't travel through the party wall
Separate front entries positioned for dignity — not a shared driveway experience
Kitchen/dining/living flow that works for a family in each dwelling
Double garages or tandem parking per unit, not a single shared bay
Landscape buffer between frontages so each home reads as its own address

How It Works

From First Call to Final Key

Feasibility covers the planning side and the financial side. Yes-or-no on whether the block supports dual occupancy under Bayside Council controls, plus indicative end values, build cost, and likely yield.

Dual occupancy floor plans designed for your Ramsgate block — attached or detached configuration, vehicle access, private open space, and full Bayside Council compliance..

Full approval management: Statement of Environmental Effects, plans, reports, and all supporting documentation lodged with Bayside Council or private certifier. We handle RFIs and conditions.

Construction follows a tight programme: dual slabs in one mobilisation, paired frame stand, simultaneous lock-up, then trades rotate between sides for fit-out so no day is lost waiting on availability. The schedule is engineered, not optimistic.

Both dwellings handed over with individual Occupation Certificates. Subdivision lodged for separate titles.

Quality Promise

Our Ramsgate duplex projects run from feasibility to subdivision under one builder. Fixed price, dual handover, full compliance.

Fixed-price duplex constructionNCC 2025 and BASIX compliantFull Bayside Council complianceStrata or Torrens title subdivisionWeekly progress updates6-year structural warranty per dwelling

Cost Guide

ItemEstimated Range
Vacant R2/R3 block in Ramsgate — duplex build$740,000 – $1,470,000
KDR duplex (demo 1930s–1970s home + dual build)$800,000 – $1,570,000
Subdivision-ready block (existing survey & titles)$740,000 – $1,370,000
Corner block dual-frontage duplex$880,000 – $1,570,000
Investor scenario (neutral-gear focus, rental-ready)$830,000 – $1,230,000

Prices are indicative for Western Sydney (2025). Actual costs depend on site, specifications, and approvals.

Our Team

OA

Oliver Alameri

Founder / Director / Builder · MPropDev · PhD Student

AA

Ahmad Alameri

Accounts Manager

CW

Claire Wendell

Project Manager

Estimate Your Build Cost

Use our free calculator to get an instant cost estimate for your project

Open Calculator →

Still got questions? Talk to Oliver directly.

30-min free call — bring your block, your brief, your budget. We'll map out feasibility, timeline, and realistic cost. No sales pitch.

Frequently Asked Questions

Google Reviews
5.0·26+ verified reviews
Buildana built our granny flat in just 12 weeks. Fast approvals, great communication, and a beautiful final product. Highly recommend.
FA

Fatima Al-Rashid

Liverpool, NSW

Read every review
Areas We Serve

We Build Across Sydney

Headquartered in Western Sydney's Fairfield. Active across all 28 metropolitan Sydney LGAs — from Penrith to the Eastern Suburbs, the Hills to the Sutherland Shire.

Ramsgate Dual Occupancy — Free Feasibility

Free duplex feasibility assessment for Ramsgate 2217. We'll check your block, estimate yield, and provide a fixed-price budget.

Start Your Project