Wentworth Point Home Builder — Custom Homes, KDR, Duplex

Builder perspective

Building in Wentworth Point — what we actually look at first

When clients ring about a Wentworth Point build, the first half-hour is always spent on the same set of variables: the existing structure, the M (Wianamatta Shale predominant) / Class P/E (alluvial Parramatta River corridor: Rydalmere, Ermington, Sydney Olympic Park, Wentworth Point) / industrial-legacy contamination overlays on Camellia, Rosehill, Silverwater fringe and Sydney Olympic Park soil, the R2 Low / R3 Medium (station precincts) / R4 High (Parramatta CBD, Westmead, Harris Park, Wentworth Point, Sydney Olympic Park, Telopea, Epping town centre) planning frame and Parramatta Council, Sydney's second CBD and a major growth-and-renewal authority. City of Parramatta Council runs the planning, and 11–15 weeks for a single-dwelling da where the lot is outside a strategic centre — fast for routine matters, slower when referrals land. Where the lot sits in R3, attached duplex is the next conversation if the lot can support the dual-occupancy minimum of 600m² (R2) under Parramatta DCP 2023. Geotech-first costing is non-negotiable on M (Wianamatta Shale predominant) / Class P/E (alluvial Parramatta River corridor: Rydalmere, Ermington, Sydney Olympic Park, Wentworth Point) / industrial-legacy contamination overlays on Camellia, Rosehill, Silverwater fringe and Sydney Olympic Park soil — the difference between a waffle pod and a piered raft is roughly twenty to forty thousand dollars, and that's not a number you guess. Buildana is a licensed NSW builder (HBL 487805C) based in Fairfield — we build through the western, southern and northern Sydney basins on fixed-price contracts. Wentworth Point sits inside our active service area. If you're sitting on a Wentworth Point block — or about to buy one — we'll walk you through what's realistic on it, what isn't, and what it actually costs to build the version that is.

Wentworth Point site considerations

On M (Wianamatta Shale predominant) / Class P/E (alluvial Parramatta River corridor: Rydalmere, Ermington, Sydney Olympic Park, Wentworth Point) / industrial-legacy contamination overlays on Camellia, Rosehill, Silverwater fringe and Sydney Olympic Park soil — typical for Wentworth Point — the slab system is one of three: waffle pod (cheapest, only on lower reactivity), stiffened raft (mid-range, most common), or piered slab into bedrock (highest cost, where reactivity is extreme or bedrock is shallow). The geotech report tells us which, and we price the contract against that report — not against the cheapest option we hope we can get away with.

Wentworth Point build FAQs

The questions we get asked most often on a first Wentworth Point site walk.

What soil class is typical in Wentworth Point 2127?

Wentworth Point sits in the M (Wianamatta Shale predominant) / Class P/E (alluvial Parramatta River corridor: Rydalmere, Ermington, Sydney Olympic Park, Wentworth Point) / industrial-legacy contamination overlays on Camellia, Rosehill, Silverwater fringe and Sydney Olympic Park reactivity range based on AS 2870 site classifications we've worked with in the suburb. That drives slab design — generally waffle-pod or stiffened raft. We never assume the class; every Buildana build commissions a geotechnical investigation before slab engineering. The geotech report is yours to keep, regardless of which builder you use after.

What does it cost to knock down and rebuild in Wentworth Point?

End values in Wentworth Point sit in the $750K–$1.5M (apartments) range based on recent sales. A typical knockdown rebuild — demo, asbestos clearance, geotech, slab, frame, full mid-spec finish for a 200m² single-storey — runs $2,000–$3,000/m² × 200m² + $0–$0k demo as a Rawlinsons-aligned 2026 baseline. We benchmark every line to the Rawlinsons Australian Construction Handbook, not back-of-envelope figures. Send through your block address and we'll run a proper feasibility against what's actually achievable on the lot.

Do you do extensions and renovations in Wentworth Point?

Yes — ground-floor additions, second-storey adds, full-house renovations, kitchens and bathrooms in Wentworth Point. The complication on 2010s+ apartment towers housing stock is that you can't price an extension off the plans alone — we pre-investigate the existing slab, frame, roof tie-in and wet-area waterproofing before quoting. Surprises during demolition are the most common reason renos blow their budget; we eliminate that by inspecting first.

How long does a DA take with City of Parramatta Council?

11–15 weeks for a single-dwelling DA where the lot is outside a Strategic Centre. CDC through a private certifier is the alternative where the design complies with the Codes SEPP — 15–25 working days on code-compliant rebuilds. Council DA application fees fall in the $2,000–$3,500 base for a class 1a residential da range. Buildana lodges either pathway and runs all RFI responses through to determination.

Why does Wentworth Point cost different from a generic Sydney average?

Wentworth Point sits very close to the Sydney metropolitan median build cost, with small adjustments for local site access and trade availability.

How long does a custom home build take in Wentworth Point?

From contract signed to handover, a single-storey 4-bedroom custom home in Wentworth Point typically takes 9–11 months on a CDC pathway, or 12–14 months if the design needs a DA through City of Parramatta Council. Add 4–6 weeks for double-storey. Pre-construction (design, engineering, BASIX, approval, contract) runs in parallel and adds another 8–16 weeks before site start. Buildana sequences both phases so the design effort and the approval effort don't sit waiting on each other.

Can I build a duplex in Wentworth Point?

Duplex feasibility in Wentworth Point depends on lot size and zoning. The minimum lot for dual occupancy under City of Parramatta Council's DCP is 600m² (R2) under Parramatta DCP 2023, and R3 Medium Density lots in the suburb can support attached duplex or townhouse configurations. We run a feasibility check on title, zone, area, frontage and slope before quoting — no point designing what won't approve.

What's the granny flat pathway in Wentworth Point?

Granny flats in Wentworth Point are usually built under State Environmental Planning Policy (Affordable Rental Housing) 2009 — secondary dwellings up to 60m², CDC pathway, no DA required on most compliant R2 Low / R3 Medium (station precincts) / R4 High (Parramatta CBD, Westmead, Harris Park, Wentworth Point, Sydney Olympic Park, Telopea, Epping town centre) lots. Typical rental return is $520–$750/week (Westmead Health Precinct demand drives premium). The block needs minimum 450m², a primary dwelling already on it, and compliance with side/rear setbacks. Where the lot doesn't comply with SEPP, we lodge a DA with City of Parramatta Council.