When does NCC 2025 start in NSW?
NCC 2025 starts in NSW on 1 May 2027.
The new National Construction Code became available for states and territories to adopt from 1 May 2026. NSW chose not to adopt it straight away. In March 2026 the government announced a 12-month transition, so the new code commences here a year later than its national release date.
Until then, the code in force in NSW is NCC 2022 Amendment 2, which took effect on 29 July 2025.
The government's stated reason was to give the industry time to adjust and to avoid disrupting projects due to start in early 2027 — and to let it make NSW-specific variations so the new provisions sit properly with state law and NSW's plumbing and drainage requirements.
If you take one line from this post, take this one: for a house, the date that decides which code you build to is the date your application is lodged — not the date you buy the land, sign a contract or get your DA.

The date that matters is when your application is lodged
NSW's own guidance is precise about this.
Complying development certificates: applications lodged on or after 29 July 2025 are assessed against NCC 2022 Amendment 2.
Construction certificates: applications for most construction certificates lodged on or after 29 July 2025 are assessed against NCC 2022 Amendment 2. Multi-storey buildings with several construction certificates have their own rules, which won't affect a house.
The same logic carries forward to the next edition. Lodge before 1 May 2027 and your house is assessed against NCC 2022 Amendment 2. Lodge on or after it and NCC 2025 applies, with NSW's variations.
That principle is getting firmer, not looser. Under NSW's new building law — the Building (Approvals and Practitioners) Act 2026, which will replace construction certificates with 'building approvals' once it commences — an approval can only be issued if the work complies with the code in force when the application was made, or when the first stage's application was made on staged work. I've covered that Act in the new NSW building laws for 2026.
In practice: if your CDC or construction certificate application is likely to go in around April or May 2027, make the call on which edition you're designing to early, with your designer and certifier in the same conversation. Don't let it be decided by which day of the week the paperwork happens to be finished.
What NCC 2025 actually changes for a house
Less than you'd think from the headlines.
The NSW Government's own description is that NCC 2025 'implements new provisions for the commercial construction sector and a small subset of essential quality and safety improvements for residential building'. Most of the big-ticket changes are commercial.
From the Australian Building Codes Board's preview of NCC 2025, the changes that touch a house are:
Condensation management. Updated provisions in the NCC 2025 Housing Provisions Part 10.8 (Condensation management), including reduced ventilation requirements for small roofs. This is the main residential change, and I've explained it below.
Structural reliability Performance Solutions. Amendments to how Performance Solutions are assessed under the structural provisions. If your engineer designs to the standard Deemed-to-Satisfy route, which is most houses, you won't notice. If your design relies on a Performance Solution, expect a more defined method for proving it.
And the changes you'll read about that don't apply to a house:
• Carpark fire safety — sprinkler protection for open-deck carparks. • Commercial energy efficiency in Volume One Section J for buildings other than Class 2, including mandatory on-site solar PV. That's commercial buildings, not your home. • All-gender sanitary facilities — optional in commercial buildings. • Combined sprinkler and hydrant systems — no plastic pipe above ground. • Water management changes in Volume One, which covers apartments and commercial buildings rather than houses.
If a builder tells you NCC 2025 is going to add tens of thousands to the cost of a standard house in NSW, ask them which provision they mean.
Stuck on approvals?
We've taken hundreds of projects through CDC and DA. Tell us your address and approval pathway — we'll map the realistic timeline.
Three things NCC 2025 didn't do in NSW (despite what you've read)
There's a lot of muddled information about this code, and some of it has been published under builders' names, including on this site. So let me be direct.
1. NCC 2025 didn't bring in 7-star energy ratings. The jump to 7 stars came with NCC 2022, nationally. And in NSW, the energy performance of a new home is set through BASIX, not the NCC's energy provisions. BASIX thermal performance standards rose on 1 October 2023 to the equivalent of a 7-star NatHERS rating for most new homes. It's a real requirement and it does cost money — through better glazing, insulation and sealing — but it's a BASIX requirement that's been in place since 2023, not an NCC 2025 change. The detail is in BASIX requirements for new homes in NSW.
2. Livable housing design isn't mandatory for houses in NSW. NCC 2022 introduced the Livable Housing Design Standard — step-free entries, wider doors, a hobless shower, reinforced walls for grab rails — and most other states and territories made it mandatory from late 2023 onwards. NSW didn't adopt it. The government has been reviewing its position, but at the time of writing, those provisions are not mandatory for new houses here. Many of those features are still good design, and I'd recommend some of them on their merits. They're just not a code requirement in this state.
3. The 'whole-of-home' energy budget isn't an NCC 2025 change in NSW either. That was NCC 2022, and again, NSW handles energy through BASIX.
Getting this right matters, because a homeowner who thinks a cost is 'required by the new code' is in a weak position to question it.
Condensation: why the one real change matters in Western Sydney
Condensation rules for houses aren't new. They first arrived in the NCC in 2019 and were expanded in NCC 2022. NCC 2025 refines them rather than starting from scratch — the headline item in the ABCB's preview is reduced ventilation requirements for small roofs, which is a sensible correction rather than an extra burden.
Why it matters at all: modern homes are sealed far tighter than the homes most of us grew up in, because energy standards demand it. A tight house holds the moisture from showers, cooking, drying clothes and breathing. When warm, moist air reaches a cold surface inside a wall or roof space, it condenses. Do that night after night through a Western Sydney winter and you get mould on the back of the plasterboard, rot in the timber and smell you can't find.
The practical items a house needs are mostly unglamorous:
• Exhaust fans that actually discharge outside, not into the roof space. A fan venting into the roof just moves the problem upstairs. • The right wall wrap — a vapour-permeable membrane, so moisture that gets into the wall can get out. • Roof space ventilation where the design calls for it. • Installation done properly — laps, tapes, penetrations. Like waterproofing, it's buried within weeks and nobody sees it again until something goes wrong.
None of this is expensive on a new build. It's cheap to get right and very expensive to get wrong — the same pattern as waterproofing failures in wet areas.
NSW's variations to NCC 2025
NSW said it would make several variations so the code lines up with state policy and has minimal impact on residential construction. The two it announced up front are both about apartments:
• Waterproofing choice for apartment remediation. Owners of apartment buildings doing remedial work can choose the waterproofing requirements of either the current NCC or NCC 2025, to keep costs down. • Energy standards don't apply to apartment common areas. The new NCC 2025 energy efficiency standards won't apply to the common areas of apartment buildings.
Neither changes anything for a house, a knockdown rebuild, a duplex or a granny flat. The government said the full set of NSW variations would be published with the complete NCC 2025. If you're building something larger — a terrace group or a small apartment block — get your designer to check the published variations, not a summary.
Free initial conversation
Get a real number for your block
Two minutes now saves the guesswork. Oliver will respond within 4 working hours for a free initial conversation about your block, your brief and what it could cost to build.
- Read against your block, not a brochure: zoning, slope and council controls first
- NSW contractor licence 487805C
- Oliver will respond within 4 working hours. No sales pressure.
Planning your build around 1 May 2027
For most homeowners, here's how it plays out.
Lodging before 1 May 2027. You're on NCC 2022 Amendment 2. Nothing changes for you, even if construction carries on well past May 2027. Code compliance is assessed against the edition that applied when you lodged.
Lodging on or after 1 May 2027. NCC 2025 applies, with NSW's variations. For a house, the design differences are modest — mainly in condensation detailing — and a competent designer and certifier will handle them. It shouldn't change your budget meaningfully.
Straddling the date. This is where people get caught. If your design is finished in March and the application isn't lodged until June because of a finance delay, a survey, or a design tweak, you've crossed editions. Small as the changes are, you want the drawings to say which edition they're designed to, and you want your certifier to agree.
Staged projects. Once the new building law commences, staged building approvals lock the code edition to the first stage's application. That's useful certainty for longer projects.
And don't confuse the code date with the other dates on your project. Your DA approval date, your contract date and your start date don't set your code edition. The lodgement date of the building approval application does.

What I'd tell a client today
Don't redesign anything because of NCC 2025. For a house in NSW it's a small update, not a new rulebook.
Do know which edition your house is being designed to, and have it written on the drawings.
Do push back on anyone using 'the new code' to explain a cost, especially if what they describe is 7-star energy, livable housing or a whole-of-home energy budget. In NSW those are BASIX, not mandatory, and NCC 2022 respectively.
Do care about condensation detailing, because it's the one part of this that affects how your house performs in year five.
And if you're timing an application around May 2027, ask your designer and certifier the question now rather than in April.
If you want your block, your timeline and your design checked against the rules as they actually stand, start with a land and feasibility assessment or get in touch. For the broader picture of what's changing in NSW building law this year, read the new NSW building laws for 2026.



